{"id":215,"date":"2017-09-22T10:00:39","date_gmt":"2017-09-22T14:00:39","guid":{"rendered":"https:\/\/robodk.com\/blog\/?p=215"},"modified":"2024-11-15T13:39:40","modified_gmt":"2024-11-15T18:39:40","slug":"automated-inspection","status":"publish","type":"post","link":"https:\/\/robodk.com\/blog\/automated-inspection\/","title":{"rendered":"Automated Inspection at NASA"},"content":{"rendered":"

NASA’s goal is to quickly inspect every fuselage after manufacturing, preventing manufacturing defects to become critical.<\/p>\n

To accomplish this task, NASA built an automated inspection system for composite aircraft fuselages. The automated system speeds up inspection time and reduces costs. A UR10 collaborative robot can do the inspection with just one operator. The robot moves an inspection head to previously programmed locations. RoboDK software is used to simulate and program the inspection pattern, ensuring the robot doesn’t miss any areas.<\/p>\n

\"Aerospace<\/a>\u00a0\"RoboDK<\/a><\/p>\n

RoboDK allowed me to easily take advantage of our robot\u2019s performance, and work with the geometrical constraints inherent with the UR10 and all attachments, by providing a user friendly programming interface and simulation environment.<\/p>\n

Joshua Brown
\nContractor at NASA Langley Research Center<\/p><\/blockquote>\n

NASA’s goal is to implement this type of inspection with other technologies as well, such as ultrasound.<\/p>\n

\"\"<\/a><\/p>\n

The robot holds an infrared inspection camera which acquires temperature data as heat flows into the part. The sensor is a FLIR thermal camera. By analyzing the flow of heat through the composite structure the sensor can detect a faulty area without damaging it.<\/p>\n

As described by Elliott Cramer: “In the computer, before you actually start moving the robot, you can develop the inspection pattern. You use a solid model of the fuselage, […] you have a solid model of the robot and the inspection tool (in this case an infrared inspection system).\u00a0Within the computer you develop the path you are going to go, you develop each of the inspection sites,\u00a0you test to make sure that it’s the most efficient path and the robot can make all the moves that you need to make.”<\/p>\n