Press the Launch Game Controller icon in the toolbar or go to Connect-Game Controller-Launch Game Controller. This will start the add-in and it will automatically try to detect the connected controller. Click again on the Launch Game Controller icon to stop the add-in.

Note: Status updates will be available in RoboDK’s status bar which is present at the bottom of the screen.

To move the robot, you must select an axis and use the D-pad to apply movement.

1.Select X Axis: Press and hold X on your controller.

2.Select Y Axis: Press and hold Y on your controller.

3.Select Z Axis: Press and hold B on your controller.

4.Move: While holding an axis button, use the D-pad up or down to move the robot along the selected axis.

Movement Controls