Tips and Best Practices

1.When replacing robots or objects, make sure only the intended item is selected in the station or station tree. If multiple items are selected by accident, the Add-in will try to process all of them at once.

2.None of these actions can be undone from the Add-in: Replace Object... and Replace Robot... delete the original item, Attach Object To Robot Link merges the geometry permanently, and Scale Object and Simplify Object modify the mesh in place. Save your station before you run any of them.

3.Even though the Add-in updates paths automatically after using Replace Robot, a smaller robot might not physically reach the old targets. Always verify programs manually after a swap to check for any unreachable target errors.

4.The settings of Attach Object To Robot Link, Scale Object and Simplify Object are stored inside the station file, not in your RoboDK preferences. The same action can therefore start with different values in two open stations. Use Restore Defaults in the dialog to go back to the standard values.