Requirements

Probing is built around a touch-trigger probe mounted on the robot, and a controller able to read its signal. Everything else depends on how the probing program reaches the robot. Select Probing ➔ Settings and set Probing style before you build your first project:

1.RoboDK is the default. The probing moves are generated as Search Linear (SearchL) instructions and you trigger the sequence directly from RoboDK: the robot driver runs it on the real robot, stops the motion when the probe triggers, and reports the contact position back to RoboDK, which is what Calibrate Reference Frame reads afterwards. This style requires a RoboDK driver with touch probe integration for your robot.

2.The six Renishaw entries (for ABB, Fanuc, KUKA, Yaskawa, Mitsubishi and Staubli) generate Renishaw Daytona macro calls instead. The program is exported with your post processor and transferred to the controller, where the Renishaw macros perform the touches and compute the alignment.