Setup

This example uses a simple setup: A robot mounted on a table (this example includes an ABB robot), a pile for the freshly molded part, a pile for the processed one, and the jig in the middle to hold the part in place.

Load the station:

1.Select FileExample Plastic Deburring - Image 1 Open

2.Locate the Plastic Deburring example from RoboDK’s examples section:           
C:/RoboDK/Examples/Plugin-Fusion360-Plastic-Deburring.rdk.

Example Plastic Deburring - Image 2

Now that you have loaded the station you can open Fusion 360.