BobCAD-CAM Introduction
The RoboDK add-in for BobCAD-CAM allows you to quickly set up robot machining projects directly from BobCAD-CAM software. With the RoboDK integration for BobCAD-CAM software you can easily combine BobCAD-CAM machining software with RoboDK to simulate and program industrial robot arms for robot machining.
With this BobCAD add-in you can easily generate error-free programs for robot machining directly from BobCAD-CAM software. Alternatively, RoboDK also supports APT CLS and G-code machining files.
More information about RoboDK for robot machining is available in the Robot Machining Section. Learn more about BobCAD-CAM software by visiting the BobCAD website.
This document describes how to set up the RoboDK plugin for BobCAD-CAM software.
Important: This plugin requires BobCAD-CAM v34 or later to work. You should also use the APT post processor (the APT post processor is a built-in post).
Tip: Read the following article to better understand the differences between a CNC and a robot for machining: https://robodk.com/blog/robot-machining-vs-cnc/.
