# Copyright 2015-2020 - RoboDK Inc. - https://robodk.com/
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# http://www.apache.org/licenses/LICENSE-2.0
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# ----------------------------------------------------
# This file is a POST PROCESSOR for Robot Offline Programming to generate programs 
# for a KUKA KRC4 robot controller with RoboDK
#
# To edit/test this POST PROCESSOR script file:
# Select "Program"->"Add/Edit Post Processor", then select your post or create a new one.
# You can edit this file using any text editor or Python editor. Using a Python editor allows to quickly evaluate a sample program at the end of this file.
# Python should be automatically installed with RoboDK
#
# You can also edit the POST PROCESSOR manually:
#    1- Open the *.py file with Python IDLE (right click -> Edit with IDLE)
#    2- Make the necessary changes
#    3- Run the file to open Python Shell: Run -> Run module (F5 by default)
#    4- The "test_post()" function is called automatically
# Alternatively, you can edit this file using a text editor and run it with Python
#
# To use a POST PROCESSOR file you must place the *.py file in "C:/RoboDK/Posts/"
# To select one POST PROCESSOR for your robot in RoboDK you must follow these steps:
#    1- Open the robot panel (double click a robot)
#    2- Select "Parameters"
#    3- Select "Unlock advanced options"
#    4- Select your post as the file name in the "Robot brand" box
#
# To delete an existing POST PROCESSOR script, simply delete this file (.py file)
#
# ----------------------------------------------------
# More information about RoboDK Post Processors and Offline Programming here:
#     https://robodk.com/help#PostProcessor
#     https://robodk.com/doc/en/PythonAPI/postprocessor.html
# ----------------------------------------------------


# ----------------------------------------------------
# Import RoboDK tools
from robodk import *

from KUKA_KRC2 import RobotPost as MainPost


# Change the main header here
DEFAULT_HEADER = '''

; GLOBAL INTERRUPT DECL 3 WHEN $STOPMESS==TRUE DO IR_STOPM ( )
; INTERRUPT ON 3

;FOLD Initialise and set default speed
BAS (#INITMOV,0)
BAS (#VEL_PTP,20)
BAS (#ACC_PTP,20)
$VEL.CP=0.2
BAS (#TOOL,0)
BAS (#BASE,0)
;ENDFOLD

;;FOLD STARTPOS
;$BWDSTART = FALSE
;PDAT_ACT = PDEFAULT
;BAS(#PTP_DAT)
;FDAT_ACT = {TOOL_NO 0,BASE_NO 0,IPO_FRAME #BASE}
;BAS(#FRAMES)
;;ENDFOLD

$ADVANCE = 5

;FOLD ---- Quickly skip BCO ----
; PTP $AXIS_ACT 
;ENDFOLD

;FOLD ---- GO HOME ----
; PTP {A1 0.000, A2 -90.000, A3 90.000, A4 0.000, A5 0.000, A6 0.000, E1 0, E2 0, E3 0, E4 0, E5 0, E6 0}
;ENDFOLD

'''


# ----------------------------------------------------    
# Object class that handles the robot instructions/syntax
class RobotPost(MainPost):
    """Robot post object"""
    # Set KRC Version (2 or 4)
    # Version 2 for KRC2 controllers or Version 4 for KRC4
    #KRC_VERSION = 2  # for KRC2 controllers
    KRC_VERSION = 4  # for KRC4 controllers
    
    # Set if we want to have cascaded program calls when program splitting takes place
    # Usually, cascaded is better for older controllers
    CASCADED_CALLS = (KRC_VERSION <= 2)

    HEADER = DEFAULT_HEADER
    
    
    
    
    
    
    
    
    
    

# -------------------------------------------------
# ------------ For testing purposes ---------------   
def Pose(xyzrpw):
    [x,y,z,r,p,w] = xyzrpw
    a = r*math.pi/180
    b = p*math.pi/180
    c = w*math.pi/180
    ca = math.cos(a)
    sa = math.sin(a)
    cb = math.cos(b)
    sb = math.sin(b)
    cc = math.cos(c)
    sc = math.sin(c)
    return Mat([[cb*ca, ca*sc*sb - cc*sa, sc*sa + cc*ca*sb, x],[cb*sa, cc*ca + sc*sb*sa, cc*sb*sa - ca*sc, y],[-sb, cb*sc, cc*cb, z],[0,0,0,1]])

def test_post():
    """Test the post with a basic program"""

    robot = RobotPost('Kuka_custom', 'Generic Kuka')

    robot.ProgStart("Program")
    robot.RunMessage("Program generated by RoboDK", True)
    robot.setFrame(Pose([807.766544, -963.699898, 41.478944, 0, 0, 0]), 4, "Frame 4")
    robot.setTool(Pose([62.5, -108.253175, 100, -60, 90, 0]), 2, "Tool 2")
    robot.MoveJ(Pose([200, 200, 500, 180, 0, 180]), [-46.18419, -6.77518, -20.54925, 71.38674, 49.58727, -302.54752] )
    robot.MoveL(Pose([200, 250, 348.734575, 180, 0, -150]), [-41.62707, -8.89064, -30.01809, 60.62329, 49.66749, -258.98418] )
    robot.MoveL(Pose([200, 200, 262.132034, 180, 0, -150]), [-43.73892, -3.91728, -35.77935, 58.57566, 54.11615, -253.81122] )
    robot.RunMessage("Setting air valve 1 on")
    robot.RunCode("ArcStart(1)", True)
    robot.Pause(1000)
    robot.MoveL(Pose([200, 250, 348.734575, 180, 0, -150]), [-41.62707, -8.89064, -30.01809, 60.62329, 49.66749, -258.98418] )
    robot.MoveL(Pose([250, 300, 278.023897, 180, 0, -150]), [-37.52588, -6.32628, -34.59693, 53.52525, 49.24426, -251.44677] )
    robot.MoveL(Pose([250, 250, 191.421356, 180, 0, -150]), [-39.75778, -1.04537, -40.37883, 52.09118, 54.15317, -246.94403] )
    robot.RunMessage("Setting air valve off")
    robot.RunCode("ArcEnd()", True)
    robot.Pause(1000)
    robot.MoveL(Pose([250, 300, 278.023897, 180, 0, -150]), [-37.52588, -6.32628, -34.59693, 53.52525, 49.24426, -251.44677] )
    robot.MoveL(Pose([250, 200, 278.023897, 180, 0, -150]), [-41.85389, -1.95619, -34.89154, 57.43912, 52.34162, -253.73403] )
    robot.MoveL(Pose([250, 150, 191.421356, 180, 0, -150]), [-43.82111, 3.29703, -40.29493, 56.02402, 56.61169, -249.23532] )
    robot.ProgFinish("Program")
    # robot.ProgSave(".","Program",True)
    for line in robot.PROG:
        print(line)
        
    if len(robot.LOG) > 0:
        mbox('Program generation LOG:\n\n' + robot.LOG)

    input("Press Enter to close...")

if __name__ == "__main__":
    """Function to call when the module is executed by itself: test"""
    test_post()