ISO-10303-21;
HEADER;
/* Generated by software containing ST-Developer
 * from STEP Tools, Inc. (www.steptools.com) 
 */

FILE_DESCRIPTION(
/* description */ (''),
/* implementation_level */ '2;1');

FILE_NAME(
/* name */ 'curvedSurface.step',
/* time_stamp */ '2025-08-27T16:39:16+01:00',
/* author */ (''),
/* organization */ (''),
/* preprocessor_version */ 'ST-DEVELOPER v20.1',
/* originating_system */ 'Autodesk Translation Framework v14.10.0.0',
/* authorisation */ '');

FILE_SCHEMA (('AUTOMOTIVE_DESIGN { 1 0 10303 214 3 1 1 }'));
ENDSEC;

DATA;
#10=MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(#11),#102);
#11=STYLED_ITEM('',(#118),#33);
#12=FACE_OUTER_BOUND('',#13,.T.);
#13=EDGE_LOOP('',(#26,#27,#28,#29));
#14=B_SPLINE_CURVE_WITH_KNOTS('',3,(#77,#78,#79,#80,#81),.UNSPECIFIED.,
 .F.,.F.,(4,1,4),(0.,1.,2.),.UNSPECIFIED.);
#15=B_SPLINE_CURVE_WITH_KNOTS('',3,(#83,#84,#85,#86,#87),.UNSPECIFIED.,
 .F.,.F.,(4,1,4),(0.,1.,2.),.UNSPECIFIED.);
#16=B_SPLINE_CURVE_WITH_KNOTS('',3,(#89,#90,#91,#92,#93),.UNSPECIFIED.,
 .F.,.F.,(4,1,4),(-2.,-1.,0.),.UNSPECIFIED.);
#17=B_SPLINE_CURVE_WITH_KNOTS('',3,(#94,#95,#96,#97,#98),.UNSPECIFIED.,
 .F.,.F.,(4,1,4),(-2.,-1.,0.),.UNSPECIFIED.);
#18=VERTEX_POINT('',#75);
#19=VERTEX_POINT('',#76);
#20=VERTEX_POINT('',#82);
#21=VERTEX_POINT('',#88);
#22=EDGE_CURVE('',#18,#19,#14,.T.);
#23=EDGE_CURVE('',#19,#20,#15,.T.);
#24=EDGE_CURVE('',#20,#21,#16,.T.);
#25=EDGE_CURVE('',#21,#18,#17,.T.);
#26=ORIENTED_EDGE('',*,*,#22,.T.);
#27=ORIENTED_EDGE('',*,*,#23,.T.);
#28=ORIENTED_EDGE('',*,*,#24,.T.);
#29=ORIENTED_EDGE('',*,*,#25,.T.);
#30=B_SPLINE_SURFACE_WITH_KNOTS('',3,3,((#50,#51,#52,#53,#54),(#55,#56,
#57,#58,#59),(#60,#61,#62,#63,#64),(#65,#66,#67,#68,#69),(#70,#71,#72,#73,
#74)),.UNSPECIFIED.,.F.,.F.,.F.,(4,1,4),(4,1,4),(0.,1.,2.),(0.,1.,2.),
 .UNSPECIFIED.);
#31=ADVANCED_FACE('',(#12),#30,.T.);
#32=OPEN_SHELL('',(#31));
#33=SHELL_BASED_SURFACE_MODEL('Body2',(#32));
#34=DERIVED_UNIT_ELEMENT(#36,1.);
#35=DERIVED_UNIT_ELEMENT(#104,-3.);
#36=(
MASS_UNIT()
NAMED_UNIT(*)
SI_UNIT(.KILO.,.GRAM.)
);
#37=DERIVED_UNIT((#34,#35));
#38=MEASURE_REPRESENTATION_ITEM('density measure',
POSITIVE_RATIO_MEASURE(2700.),#37);
#39=PROPERTY_DEFINITION_REPRESENTATION(#44,#41);
#40=PROPERTY_DEFINITION_REPRESENTATION(#45,#42);
#41=REPRESENTATION('material name',(#43),#101);
#42=REPRESENTATION('density',(#38),#101);
#43=DESCRIPTIVE_REPRESENTATION_ITEM('Aluminum','Aluminum');
#44=PROPERTY_DEFINITION('material property','material name',#111);
#45=PROPERTY_DEFINITION('material property','density of part',#111);
#46=AXIS2_PLACEMENT_3D('',#49,#47,#48);
#47=DIRECTION('axis',(0.,0.,1.));
#48=DIRECTION('refdir',(1.,0.,0.));
#49=CARTESIAN_POINT('',(0.,0.,0.));
#50=CARTESIAN_POINT('Ctrl Pts',(-813.579334929839,-136.233834861177,0.));
#51=CARTESIAN_POINT('Ctrl Pts',(-813.579334929839,-11.6855835292679,0.));
#52=CARTESIAN_POINT('Ctrl Pts',(-813.579334929839,237.41091913455,0.));
#53=CARTESIAN_POINT('Ctrl Pts',(-734.306266898846,486.507421798368,-109.99809508512));
#54=CARTESIAN_POINT('Ctrl Pts',(-694.669732883349,611.055673130277,-164.99714262768));
#55=CARTESIAN_POINT('Ctrl Pts',(-634.984467747954,-136.233834861177,0.));
#56=CARTESIAN_POINT('Ctrl Pts',(-634.984467747954,-11.6855835292679,31.7472387001015));
#57=CARTESIAN_POINT('Ctrl Pts',(-634.984467747954,237.41091913455,95.2417161003044));
#58=CARTESIAN_POINT('Ctrl Pts',(-582.135755727292,486.507421798368,-41.5848246899785));
#59=CARTESIAN_POINT('Ctrl Pts',(-555.711399716961,611.055673130277,-109.99809508512));
#60=CARTESIAN_POINT('Ctrl Pts',(-277.794733384184,-136.233834861177,0.));
#61=CARTESIAN_POINT('Ctrl Pts',(-277.794733384184,-11.6855835292679,95.2417161003044));
#62=CARTESIAN_POINT('Ctrl Pts',(-277.794733384184,237.41091913455,285.725148300913));
#63=CARTESIAN_POINT('Ctrl Pts',(-277.794733384184,486.507421798368,95.2417161003044));
#64=CARTESIAN_POINT('Ctrl Pts',(-277.794733384184,611.055673130277,0.));
#65=CARTESIAN_POINT('Ctrl Pts',(-32.8697328274785,-42.6787817660579,0.));
#66=CARTESIAN_POINT('Ctrl Pts',(4.55184510820942,50.684451867478,31.7472387001015));
#67=CARTESIAN_POINT('Ctrl Pts',(79.3950009795856,237.41091913455,95.2417161003044));
#68=CARTESIAN_POINT('Ctrl Pts',(79.3950009795856,486.507421798368,31.7472387001015));
#69=CARTESIAN_POINT('Ctrl Pts',(79.3950009795854,611.055673130277,0.));
#70=CARTESIAN_POINT('Ctrl Pts',(89.5927674508744,4.09874478150149,0.));
#71=CARTESIAN_POINT('Ctrl Pts',(145.725134354406,81.869469565851,0.));
#72=CARTESIAN_POINT('Ctrl Pts',(257.98986816147,237.41091913455,0.));
#73=CARTESIAN_POINT('Ctrl Pts',(257.98986816147,486.507421798368,0.));
#74=CARTESIAN_POINT('Ctrl Pts',(257.98986816147,611.055673130277,0.));
#75=CARTESIAN_POINT('',(-813.579334929839,-136.233834861177,0.));
#76=CARTESIAN_POINT('',(89.5927674508744,4.09874478150149,0.));
#77=CARTESIAN_POINT('Ctrl Pts',(-813.579334929839,-136.233834861177,0.));
#78=CARTESIAN_POINT('Ctrl Pts',(-634.984467747954,-136.233834861177,0.));
#79=CARTESIAN_POINT('Ctrl Pts',(-277.794733384184,-136.233834861177,0.));
#80=CARTESIAN_POINT('Ctrl Pts',(-32.8697328274785,-42.6787817660579,0.));
#81=CARTESIAN_POINT('Ctrl Pts',(89.5927674508744,4.09874478150149,0.));
#82=CARTESIAN_POINT('',(257.98986816147,611.055673130277,0.));
#83=CARTESIAN_POINT('Ctrl Pts',(89.5927674508744,4.09874478150149,0.));
#84=CARTESIAN_POINT('Ctrl Pts',(145.725134354406,81.869469565851,0.));
#85=CARTESIAN_POINT('Ctrl Pts',(257.98986816147,237.41091913455,0.));
#86=CARTESIAN_POINT('Ctrl Pts',(257.98986816147,486.507421798368,0.));
#87=CARTESIAN_POINT('Ctrl Pts',(257.98986816147,611.055673130277,0.));
#88=CARTESIAN_POINT('',(-694.669732883349,611.055673130277,-164.99714262768));
#89=CARTESIAN_POINT('Ctrl Pts',(257.98986816147,611.055673130277,0.));
#90=CARTESIAN_POINT('Ctrl Pts',(79.3950009795854,611.055673130277,0.));
#91=CARTESIAN_POINT('Ctrl Pts',(-277.794733384184,611.055673130277,0.));
#92=CARTESIAN_POINT('Ctrl Pts',(-555.711399716961,611.055673130277,-109.99809508512));
#93=CARTESIAN_POINT('Ctrl Pts',(-694.669732883349,611.055673130277,-164.99714262768));
#94=CARTESIAN_POINT('Ctrl Pts',(-694.669732883349,611.055673130277,-164.99714262768));
#95=CARTESIAN_POINT('Ctrl Pts',(-734.306266898846,486.507421798368,-109.99809508512));
#96=CARTESIAN_POINT('Ctrl Pts',(-813.579334929839,237.41091913455,0.));
#97=CARTESIAN_POINT('Ctrl Pts',(-813.579334929839,-11.6855835292679,0.));
#98=CARTESIAN_POINT('Ctrl Pts',(-813.579334929839,-136.233834861177,0.));
#99=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(0.01),#103,
'DISTANCE_ACCURACY_VALUE',
'Maximum model space distance between geometric entities at asserted c
onnectivities');
#100=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(0.01),#103,
'DISTANCE_ACCURACY_VALUE',
'Maximum model space distance between geometric entities at asserted c
onnectivities');
#101=(
GEOMETRIC_REPRESENTATION_CONTEXT(3)
GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#99))
GLOBAL_UNIT_ASSIGNED_CONTEXT((#103,#105,#106))
REPRESENTATION_CONTEXT('','3D')
);
#102=(
GEOMETRIC_REPRESENTATION_CONTEXT(3)
GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#100))
GLOBAL_UNIT_ASSIGNED_CONTEXT((#103,#105,#106))
REPRESENTATION_CONTEXT('','3D')
);
#103=(
LENGTH_UNIT()
NAMED_UNIT(*)
SI_UNIT(.MILLI.,.METRE.)
);
#104=(
LENGTH_UNIT()
NAMED_UNIT(*)
SI_UNIT($,.METRE.)
);
#105=(
NAMED_UNIT(*)
PLANE_ANGLE_UNIT()
SI_UNIT($,.RADIAN.)
);
#106=(
NAMED_UNIT(*)
SI_UNIT($,.STERADIAN.)
SOLID_ANGLE_UNIT()
);
#107=SHAPE_DEFINITION_REPRESENTATION(#108,#109);
#108=PRODUCT_DEFINITION_SHAPE('',$,#111);
#109=SHAPE_REPRESENTATION('',(#46,#33),#101);
#110=PRODUCT_DEFINITION_CONTEXT('part definition',#115,'design');
#111=PRODUCT_DEFINITION('(Unsaved)','(Unsaved)',#112,#110);
#112=PRODUCT_DEFINITION_FORMATION('',$,#117);
#113=PRODUCT_RELATED_PRODUCT_CATEGORY('(Unsaved)','(Unsaved)',(#117));
#114=APPLICATION_PROTOCOL_DEFINITION('international standard',
'automotive_design',2009,#115);
#115=APPLICATION_CONTEXT(
'Core Data for Automotive Mechanical Design Process');
#116=PRODUCT_CONTEXT('part definition',#115,'mechanical');
#117=PRODUCT('(Unsaved)','(Unsaved)',$,(#116));
#118=PRESENTATION_STYLE_ASSIGNMENT((#119));
#119=SURFACE_STYLE_USAGE(.BOTH.,#120);
#120=SURFACE_SIDE_STYLE('',(#121));
#121=SURFACE_STYLE_FILL_AREA(#122);
#122=FILL_AREA_STYLE('Aluminum - Satin',(#123));
#123=FILL_AREA_STYLE_COLOUR('Aluminum - Satin',#124);
#124=COLOUR_RGB('Aluminum - Satin',0.96078431372549,0.96078431372549,0.964705882352941);
ENDSEC;
END-ISO-10303-21;