Search Results
Thread: Locking the table during milling
Post: RE: Locking the table during milling
Hi, Jeremy There are two files in the attachment, zip from temp and photo programs with alphacam. I don't know why, but if program generate with tool waterjet, the program is created correctly. But w...
4 Replies 325 Views
Thread: Locking the table during milling
Post: RE: Locking the table during milling
Hi Jeremy I try this functions, but this is don`t work. I export from the Alphacam, create 4 separate operations, but when exported in RoboDK they are combined into one Serg
4 Replies 325 Views
Thread: Program Events
Post: RE: Program Events
Hello, Raffaele Yes it is possible Best regard Serg
3 Replies 342 Views
Thread: Locking the table during milling
Post: Locking the table during milling
Hi to everyone! I have robot with an external axis. Is it possible to lock the table so that it only rotates to change the processing side(0-90; 90-180; 180-270; 270-0)? Thanks in advance
4 Replies 325 Views
Thread: Work with blade
Post: RE: Work with blade
Hi I found the reason for the incorrect generation of the program. There are two options for machining in a circle The first is when the tool rotates around its axis, and the point of contact of the ...
5 Replies 474 Views
Thread: Work with blade
Post: RE: Work with blade
Hi I know this metod and for mill this work very good, but for blade no. And don't understand why. Thank you Serg
5 Replies 474 Views
Thread: Work with blade
Post: Work with blade
Hi to everyone! I have robot with an external axis. When I use it with mill, everything is generated correctly: the table rotates, the robot stands still. But, if I use a blade, then with the same se...
5 Replies 474 Views
Thread: Mill with an external axis
Post: RE: Mill with an external axis
Yes, I know this. I checked everything again. When I am in T1 mode, everything work well, when the table rotates, the cutter moves behind it. But when I run the program in AUTO or EXTERNAL, it seems...
8 Replies 643 Views
Thread: Mill with an external axis
Post: RE: Mill with an external axis
Maybe you can send me for KRC4, and I search, how I can do this on KRC2?
8 Replies 643 Views
Thread: Mill with an external axis
Post: RE: Mill with an external axis
Can you tell me, how I can can fix/set this on KRC2? Thank you
8 Replies 643 Views
Thread: Mill with an external axis
Post: RE: Mill with an external axis
Hi, Jeremy I try, but this don't help Maybe something else? Serg
8 Replies 643 Views
Thread: Mill with an external axis
Post: Mill with an external axis
Hi to everyone!  I have the attached setup in which I want the robot to mill the element using the external axis. The expected behavior is: the robot approaches, takes position and then the external ...
8 Replies 643 Views
Thread: Problem with simulation roboDK and real move
Post: RE: Problem with simulation roboDK and real move
Hi Jeremy Yes, I create this robots. The direction of rotation of the axis in the model is correct, but when processing an element, the rotation of the 4th, 5th and 6th axis is opposite to the simula...
8 Replies 1,094 Views
Thread: Problem with simulation roboDK and real move
Post: RE: Problem with simulation roboDK and real move
I use raw krl instructions, but first command I have PTP, then LIN. This is problem with 4,5 and 6 axis(singularity), but why roboDK don`t show me. Maybe my setting are not correct?
8 Replies 1,094 Views
Thread: Problem with simulation roboDK and real move
Post: RE: Problem with simulation roboDK and real move
Hi Olivier, This is KUKA KR360 The orientation of the tool is correct, but in simulation robot turns the fourth axis differently than in real  Serg
8 Replies 1,094 Views
Thread: Problem with simulation roboDK and real move
Post: Problem with simulation roboDK and real move
Hi to everyone!  In roboDK on simulation, the robot rotates with the 4 axis by + but real robot rotates by -  Element milling is correct Thanks in advance 
8 Replies 1,094 Views
Thread: Correcting the geometry of the robot
Post: RE: Correcting the geometry of the robot
Yes, we don`t have this model. This is KR360-L240-2
5 Replies 812 Views
Thread: How to save tool and base number for program?
Post: RE: How to save tool and base number for program?
Hi, Ophakala You can change postprocessor. When you generate the code, there will always be Tool 16 and Base 19
3 Replies 694 Views
Thread: Correcting the geometry of the robot
Post: Correcting the geometry of the robot
Hi to everyone! In RoboDK, I create new robot, all work good, but pneumatic cylinder move with 2 axis. How I can fix it Thanks in advance 
5 Replies 812 Views
Thread: Corect path tool
Post: RE: Corect path tool
Ok. Please tell me how I can change the path of the robot as roboDK generates a path with a collision.  I change the angle axis A and everything works, but when I generate the program, the axis does n...
4 Replies 830 Views
Thread: Corect path tool
Post: Corect path tool
Hi to everyone! In RoboDK, I can change the position tool, but when I generate the code, the position doesn't change. What I do wrong? Thanks in advance 
4 Replies 830 Views
Thread: Alphacam pluggin CAM path error
Post: RE: Alphacam pluggin CAM path error
Hi Thank you very much, all work Best regards Sergii
3 Replies 713 Views
Thread: Alphacam pluggin CAM path error
Post: Alphacam pluggin CAM path error
Hi to everyone! I found a mistake on the RoboDK/Alpha combo. When I program a arc ramp on Alphacam like the image nr1,2 Next, I export the CAM to RoboDK using the plugin. The arc has not the right or...
3 Replies 713 Views