[Moritz D]

Hello RoboDK Team,
currently i am trying to 3D-Print with a filament extruder with a Fanuc robot („ER-4iA/R30iB Mate Plus“), controlling it online from RoboDK.
To controll the extruder i need to constantly send out the E-Values to a external PLC while controlling the robot live throught RoboDK.
Is it possible to send out the E-values over Profinet, or the digital IO’s (FANUC IO-Link) while using a Robot Machining Project and controlling it online with RoboDK? 
It would be great to know if the fanuc Post Prozessor from RoboDK can do that.

I would greatly appreciate your help.

Moritz

[Albert]

You can customize your post processor to output any type of code to drive external actuators and sensors. You can find more information about how to customize post processors and an example here:
https://robodk.com/doc/en/Post-Processor...ampleMoveJ

And a more practical example to filter specific functions here:
https://robodk.com/forum/Thread-Use-ABB-...P-tooldata