Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Postprocessor for Peitian robot

#1
Please would it be possible to add AIR7-920 to RoboDK library?

http://robot.peitian.com/industrial/product_97.html#4

This is a Chinese brand we buy for Robotics classes in our school. We do not hold a professional RDK license but purchased five educational ones. So far we have been successfully using RoboDK with KUKA but now making another step with this new robot, which is currently not supported by RDK.
#2
(10-10-2021, 06:03 AM)maciej Wrote: Please would it be possible to add AIR7-920 to RoboDK library?

http://robot.peitian.com/industrial/product_97.html#4

This is a Chinese brand we buy for Robotics classes in our school. We do not hold a professional RDK license but purchased five educational ones. So far we have been successfully using RoboDK with KUKA but now making another step with this new robot, which is currently not supported by RDK.

Can you support this robot manufacturer, ie is the information in the link enough?
#3
We need more information to properly add a robot. We need the 3D files of your robot (preferably STEP or IGES format) to add it to RoboDK. If you can provide a PDF sketch with dimensions and robot related information it would also help (payload, reach, etc). We can usually add the robot in 2 business with no additional cost days with the purchase of a Professional license.
 
We would also need more information to properly add the post processor. More information here:
https://robodk.com/doc/en/Post-Processor...SelectPost
#4
(10-25-2021, 08:05 AM)Albert Wrote: We need more information to properly add a robot. We need the 3D files of your robot (preferably STEP or IGES format) to add it to RoboDK. If you can provide a PDF sketch with dimensions and robot related information it would also help (payload, reach, etc). We can usually add the robot in 2 business with no additional cost days with the purchase of a Professional license.
 
We would also need more information to properly add the post processor. More information here:
https://robodk.com/doc/en/Post-Processor...SelectPost
Thank you, Albert.

All the relevant robot's data is zipped here: https://www.dropbox.com/s/veb8dzzg0i3mro...K.zip?dl=0

There are two questions:

1. With this data - can you add the robot to RDK (is data unambiguous and sufficient?)
2. We have 5 educational licences - can the robot be added with no extra cost or we have to buy a pro version? Or is there another fee to add a robot under educational version?
  




Users browsing this thread:
1 Guest(s)