[nosal101]

Hello everyone, I'm new to RoboDK and I'm playing around with options in 3D printing. I have this problem: I loaded slic3r 1.2.9 in robodk and I can't select the Edit path manually option. In the console I see something like this: 

Unknown option match_horizontal_surfaces
Unknown option retract_lift_below
Unknown option shortcuts ... Can't load '/home/RoboDK/Other/Slic3r/lib/vrt/9e109cfe461eb9a764d58156ba7bc844/OpenGL.so' for OpenGL module: libglut.so.3: cannot open shared object file: No such file or directory at <content>/DynaLoader.pm line 157.
at /home/RoboDK/Other/Slic3r/lib/std/Slic3r/GUI/Plater/2DToolpaths.pm line 120
Compilation failed in require at /home/RoboDK/Other/Slic3r/lib/std/Slic3r/GUI/Plater/2DToolpaths.pm line 120.
BEGIN failed--compilation aborted at /home/RoboDK/Other/Slic3r/lib/std/Slic3r/GUI/Plater/2DToolpaths.pm line 120.
Compilation failed in require at /home/RoboDK/Other/Slic3r/lib/std/Slic3r/GUI.pm line 16.
BEGIN failed--compilation aborted at /home/RoboDK/Other/Slic3r/lib/std/Slic3r/GUI.pm line 16.
Compilation failed in require at (eval 71) line 1.

what am I doing wrong that this doesn't work, I'll also add that I'm working on ubuntu

[Albert]

I believe this is an issue related to Slic3r software. Does it work if you follow the recommended steps to install Slic3r?

One option is to generate the G-code file from your Slicer software and import it in RoboDK for 3D printing with your robot.