[tatupaljakka]

I would like to ask: has anyone worked with a Stäubli robot arm using an Adept controller? I have not succeed to connect to the robot.

If anyone has any information or knowledge about this i hope willing to share data and help to get it work.

Stäubli RX130B with ADEPT CS7MB Controller

[Albert]

You should be able to program your Stäubli robot using the Adept V+ post processor (called Adept Vplus). The driver is not available for this robot so you won't be able to connect to the robot from RoboDK.

The following link shows how you can select a post processor for a specific robot in your RoboDK project.
https://robodk.com/doc/en/Post-Processor...SelectPost