[LucasPMagno]

Hello,

I am trying to connect to an Epson C3 robot arm. This is what I get in the log:

Code:

Sending command...
Number of axes: 6
Using IP: 192.168.0.50
Using port: 5000
Using password: epsonrobot
Connecting to robot 192.168.0.50:5000
Unexpected length of status_flags (10, expected 10) or error_code (4, expected 4

I can connect and control the robot with the ethernet interface just fine with my own code.

[Albert]

Are you using the latest version of RoboDK?