Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

ABB YUMI - IRB 14000

#1
Hello,

I am trying to connect to the ABB Yumi collaborative robot through RoboDK. 

I have the IP address as 192.168.125.40 for the Right and 192.168.125.30 for the left. 

When I
#2
Hi Kratos,

Can you be a bit more specific regarding what's going on?

Here's the documentation regarding ABB robots.
https://robodk.com/doc/en/Robots-ABB.html#ABB

Jeremy
Find useful information about RoboDK and its features by visiting our Online Documentation and by watching tutorials on our Youtube Channel


#3
I am trying to connect to IRB 14000 through ethernet cable to move the robot automatically from a connected PC using RoboDK. Do i need to load the RoboDK driver module for ABB robots onto to the IRB 14000 first?
#4
(12-08-2020, 03:00 PM)Jeremy Wrote: Hi Kratos,

Can you be a bit more specific regarding what's going on?

Here's the documentation regarding ABB robots.
https://robodk.com/doc/en/Robots-ABB.html#ABB

Jeremy
 I did exactly as it said in the documentation. However, when i try to run it as the main program, I get an error message on the FlexPendant. (see Image)

 Do you have any idea how to solve this? 

Sorry please oblige as I am new to RAPID programming.


Attached Files Thumbnail(s)
   
#5
Hi Kratos,

The error message seems to suggest you have move then one "Main" program on the controller.

Is it possible?
Are you using the Yumi with dual-arm or the model with only one arm.

Jeremy
Find useful information about RoboDK and its features by visiting our Online Documentation and by watching tutorials on our Youtube Channel


  




Users browsing this thread:
1 Guest(s)