Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Abb controlling real robot

#1
Question 
Hi all wondering if any one had issue with controlling the real robot using Robodk
I have no issue connecting but when I change the axis as follows when clicking move joint when connected
axis 1 in Robodk moves axis 2 real robot
axis 6 in Robodk doesn't do anything real robot
axis 5 in Robodk moves axis 6 real robot
axis 4 in robodk moves axis 5 real robot
axis 2 in robodk moves axis 3 real robot
axis 3 in robodk moves axis 4 real robot
#2
Hi Patrick,
Make sure to update RoboDK to the latest version and take the latest version of the drivers (ABB RAPID files/MOD files).
In the header of the MOD file you'll see a small procedure mentioning the driver you should use:
  • If you use the Ethernet/Socket Messaging communication driver (RDK_DriverSocket.MOD which requires ABB's PC interface option) you'll need to use apirobot.
  • If you use the Serial communication driver (RS232 communication, it does not require any special options on the ABB controller) you should use the driver called apiabb.
Albert
  




Users browsing this thread:
1 Guest(s)