Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Alternative Robot Configurations Not Showing for FANUC CRX 10iA/L

#1
I am trying to test different configurations of the arm to fit into the work cell, but when I pull up the configuration menu, there is only one configuration available to choose from. It shows as only having 1/1 configurations available and if I choose another configuration, the arm disappears. (See Attached Images) It is not a singularity issue because I am unable to use any config except id.1 regardless of pose. 
   
   
Any Ideas what is causing this? Fairly new to roboDK, so I suspect it is something simple.

Thank you in advance!
#2
Unfortunately we don't support multiple configurations for the Fanuc CRX robots.

One workaround would be to copy the pose of your target, move the robot joints to a different configuration, then, paste the pose to recalculate the joints with the same pose you previously had.
#3
Hello,
Any update on this problem?
We are also experiencing this on the new RDK version.
Regards, Tom
#4
Unfortunately, there are no updates regarding this behavior for now.
  




Users browsing this thread:
1 Guest(s)