Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

DATA COLLECTION AND USAGE FOR ROBOT SIMULATION

#1
How would you acquire data on joint positions, acceleration, TCP, etc from a real robot and import so as to update the Robodk simulation?
#2
RoboDK automatically shows the robot position in real time when you use the driver communication (Run on robot option). However, this is not supported for all robot controllers. What robot controllers are you planning to use?
#3
(06-02-2020, 12:17 AM)Albert Wrote: RoboDK automatically shows the robot position in real time when you use the driver communication (Run on robot option). However, this is not supported for all robot controllers. What robot controllers are you planning to use?
We are using a continuous-path control
#4
(06-17-2020, 01:38 AM)Deo Kibira Wrote:
(06-02-2020, 12:17 AM)Albert Wrote: RoboDK automatically shows the robot position in real time when you use the driver communication (Run on robot option). However, this is not supported for all robot controllers. What robot controllers are you planning to use?
 
#5
Hi Deo,

We need to know what specific robot controller you are using.

Jeremy
Find useful information about RoboDK and its features by visiting our Online Documentation and by watching tutorials on our Youtube Channel


  




Users browsing this thread:
1 Guest(s)