11-29-2021, 02:34 PM
When I drag over the ALL.PRM file to RoboDK I get the following error as shown in image attached
Error on ALL.PRM import |
11-29-2021, 02:34 PM
When I drag over the ALL.PRM file to RoboDK I get the following error as shown in image attached
11-29-2021, 11:47 PM
There is no image attached.
Jeremy
Find useful information about RoboDK and its features by visiting our Online Documentation and by watching tutorials on our Youtube Channel.
11-30-2021, 01:34 PM
Here is the screen shot that I thought I had attached
11-30-2021, 02:00 PM
Did you select the correct robot in RoboDK? It looks like there is a 365 mm error on the length of the arm (d4).
If you can send us your RoboDK project and the ALL.PRM we can better take a look.
11-30-2021, 03:38 PM
Here are the 2 files as requested The robot I chose was an ER165D the one I am using is a ES165N. I will have to find the manuals for dimensional data. I renamed the ALL.PRM to ALL.rdk as the system would not let me attach a .PRM file
|
Users browsing this thread: |
1 Guest(s) |