[dcrocha]

Hello,

I was trying to do an application with the FANUC CRX-10iA and it seemed the dimensions were wrong. I measured them and they were in fact not correct.
I compared with the CRX-10iA/L and basically when you download the CRX-10iA, you actually get the CRX-10iA/L. 

(When you download the CRX-10iA/L you get the right robot with the right dimensions.)

[Jeremy]

Hi Dcrocha,

That's for bringing up the issue.
We'll try to fix that in a timely manner.

Jeremy

[Albert]

The issue is now fixed. Thank you for pointing this out. 

You'll find the latest version for both Fanuc CRX robots attached.