Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
FANUC CRX-10iA Wrong on RoboDK Online Library
#1
Hello,

I was trying to do an application with the FANUC CRX-10iA and it seemed the dimensions were wrong. I measured them and they were in fact not correct.
I compared with the CRX-10iA/L and basically when you download the CRX-10iA, you actually get the CRX-10iA/L. 

(When you download the CRX-10iA/L you get the right robot with the right dimensions.)
#2
Hi Dcrocha,

That's for bringing up the issue.
We'll try to fix that in a timely manner.

Jeremy
Find useful information about RoboDK and its features by visiting our Online Documentation and by watching tutorials on our Youtube Channel


#3
The issue is now fixed. Thank you for pointing this out. 

You'll find the latest version for both Fanuc CRX robots attached.


Attached Files
.robot   Fanuc-CRX-10iA-L.robot (Size: 2.18 MB / Downloads: 92)
.robot   Fanuc-CRX-10iA.robot (Size: 2.65 MB / Downloads: 96)
  




Users browsing this thread:
1 Guest(s)