02-28-2022, 12:17 PM
(This post was last modified: 02-28-2022, 12:18 PM by Mikep91.
Edit Reason: Missed a picture attachment
)
Hello everyone & RoboDK.
Im hoping to get some help on how to adjust our settings in RoboDK so we would be able to 3D Print non-planar.
With our current settings we have locked our Z axis so we dont get weird rotations around the toolhead while printing.
We would like to achieve to have the toolhead rotate slightly around the X-axis following the path of printing, see picture ("TCPFollowpath1+TCPFollowpath2)
Are there any way to open up the X-axis rotation so that the tool orientation follows the path of printing, keeping a perpendicular angle to what it's printing??
Im hoping to get some help on how to adjust our settings in RoboDK so we would be able to 3D Print non-planar.
With our current settings we have locked our Z axis so we dont get weird rotations around the toolhead while printing.
We would like to achieve to have the toolhead rotate slightly around the X-axis following the path of printing, see picture ("TCPFollowpath1+TCPFollowpath2)
Are there any way to open up the X-axis rotation so that the tool orientation follows the path of printing, keeping a perpendicular angle to what it's printing??