Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Pilot kuka iiwa14 with robodk

#1
Hi,

I want to pilot an kuka iiwa 14 with robodk but after the connexion with the robot, nothing is happening.
If I give a trajectory with robodk, the robot disconnect automatically.
There is obviously something that I did not do but what?

Can you help me ?


Cordially,

Jérôme
#2
Hi Jerome,

Take a look at this thread, I think you will find the answer you are looking for.
https://robodk.com/forum/Thread-Kuka-LBR...light=iiwa

Jeremy
#3
Hi Jeremy,

Thank you for your response, I have tried this method before but I am missing some software in Sunrise Workbench required in this solution. I'm waiting for a response from the kuka service for the missing software.

Maybe today there is another way to make the iiwa14 work with robodk without going through this method because I saw that the software missing for the above solution would pay off.

Jérôme
#4
Hi Jérôme,

Personally, my experience with the IIWA is pretty limited.
I saw one, but that's pretty much it.

So I can't help you much with the details.
Désolé.

Jérémy
#5
Re,

Ok, I'll wait that kuka response me.
Thank you so much.

Jérôme
  




Users browsing this thread:
1 Guest(s)