Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Zero position for - 6 axes industrial robot

#1
Hello,
 
I'm using the mechanism wizard to model a custom 6dof robot. Luckily, my kinematics are represented by the "6 axes industrial robot" inside the mechanism wizard. 
However, my [0 ,0, 0, 0, 0, 0] is a straight, candle-like robot configuration. But inside the wizard, a3=0 is represented by a 90° angle.
 
My question: How can I define that the resulting robot mechanism from the wizard is already tilted by 90°? Basically, I need a redefinition of the robot joint for a3=0.
 
Best,
Mike


Attached Files Thumbnail(s)
   
#2
adding -90 on θ₃ should do the trick
   

I rotated it on an ABB as an example. (I rotated the geometries first)
   
#3
"adding -90 on θ₃ should do the trick"

It worked as you said! Thank you!
  




Users browsing this thread:
1 Guest(s)