Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

CNC-milling with the Fanuc M-20iA/35M Robot and R30iB controller

#11
Hi Jacob,

Note that you can import many CAM program file format, for example .nc, .gcode, .apt .
Simply drag and drop them in a RDK station with a robot, a tool and a reference frame.

Have a great day.
Jeremy
#12
It is quite some time ago that I created this thread, but I am still stuck.
I am able to run the dripfeed by placing the M_...... .TP file manually on the robot via filezilla.
However I am not able to send the program to the robot directly via (CTRL+F6).
I think I have the wrong Remote FTP path, i tried almost everything (\md:\ , :md , \:md , :MD\ , \:MD\) but nothing helps to send the programm to the robot.
[Image: remote-ftp-path.png]

So I hope someone can give a direction on how to set up the Remote FTP path properly.

Looking forward for answers.

Kind regards,

Marco Withag
#13
Hi Marco,

I recommend you to use the following remote path:
md:/

This is the default value. Let me know if you have any issues.

Albert
#14
(07-17-2020, 03:41 PM)Albert Wrote: Hi Marco,

I recommend you to use the following remote path:
md:/

This is the default value. Let me know if you have any issues.

Albert

Thank you for your reply Albert!
I will try it after the weekend and come back to it.

Kind regards,

Marco Withag
#15
Dear Albert, 

I tried the path you suggested, but still nothing is sent to the robot.
Do you have any other idea what could be wrong?

Kind regards,

Marco Withag
#16
Are you able to send files through FileZille?
Maybe you don't have write permission via FTP?
#17
(07-20-2020, 01:41 PM)Albert Wrote: Are you able to send files through FileZille?
Maybe you don't have write permission via FTP?

Yes I am able to send files through FileZilla. How can I see that I have/don't have write permission via FTP?
#18
If you can send files through FileZilla it means it should work. What error message do you see in RoboDK?

I would recommend you to close FileZilla when you send the program to your Fanuc controller from RoboDK in case that 2 connections provoke issues.
#19
I got it up and running!
I think there was indeed a problem with having filezilla connected at the same time as RoboDK.
The Remote FTP path that is working for me is   \md:
Thank you all for the great help!

Kind regards,

Marco Withag 

  




Users browsing this thread:
2 Guest(s)