Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Request for Epson Model In RoboDK

#1
[color=rgba(0, 0, 0, 0.9)]Can you please add the Epson Articulated Model VT6 and SCARA Model T6 to the software. Please do the needful.[/color]
#2
VT6 is added. Good Support. T6 remains
#3
EPSON T6 3D Cad file and Specification sheets attached for your reference.

Please do the needful.


Attached Files Thumbnail(s)
       

.zip   epson_t6-602s_step.zip (Size: 2.07 MB / Downloads: 471)
#4
Hi Azhagar, 

Here's your robot. 
Let me know if you see anything wrong. 

Jeremy


Attached Files
.robot   Epson-T6-602S.robot (Size: 7.27 MB / Downloads: 604)
Find useful information about RoboDK and its features by visiting our Online Documentation and by watching tutorials on our Youtube Channel


#5
(12-16-2020, 09:36 PM)Jeremy Wrote: Hi Azhagar, 

Here's your robot. 
Let me know if you see anything wrong. 

Jeremy

Hello Jeremy

I will check and revert back to you..

Thanks for your valuable time and support.

Regards

Azhagar S
#6
(12-17-2020, 03:45 AM)Azhagar Wrote:
(12-16-2020, 09:36 PM)Jeremy Wrote: Hi Azhagar, 

Here's your robot. 
Let me know if you see anything wrong. 

Jeremy

Hello Jeremy
I have been working in this robot VT6 where i have to set two TCP. Can you tell me how to do it.

Regards

Azhagar S
#7
Hi Azhagar,

Take a look at this playlist.
You will find the info you want in the two videos related to the Tool.
https://www.youtube.com/playlist?list=PL..._SCH7wxxXl

You should take a look at the whole playlist though.

Lasting, keep the technical questions in the "General" section, please.

Jeremy
Find useful information about RoboDK and its features by visiting our Online Documentation and by watching tutorials on our Youtube Channel


#8
(01-03-2021, 05:44 AM)Jeremy Wrote: Hi Azhagar,

Take a look at this playlist.
You will find the info you want in the two videos related to the Tool.
https://www.youtube.com/playlist?list=PL..._SCH7wxxXl

You should take a look at the whole playlist though.

Lasting, keep the technical questions in the "General" section, please.

Jeremy

Hello Jeremy

Is it possible to add two tcp for single tool. I have a requirement in a simulation where i have define 2 tcp. Please tell me how to do it ?
  




Users browsing this thread:
1 Guest(s)