[Azhagar]

[color=rgba(0, 0, 0, 0.9)]Can you please add the Epson Articulated Model VT6 and SCARA Model T6 to the software. Please do the needful.[/color]

[Azhagar]

VT6 is added. Good Support. T6 remains

[Azhagar]

EPSON T6 3D Cad file and Specification sheets attached for your reference.

Please do the needful.

[Jeremy]

Hi Azhagar, 

Here's your robot. 
Let me know if you see anything wrong. 

Jeremy

[Azhagar]

Hi Azhagar, 

Here's your robot. 
Let me know if you see anything wrong. 

Jeremy

Hello Jeremy

I will check and revert back to you..

Thanks for your valuable time and support.

Regards

Azhagar S

[Azhagar]

Hi Azhagar, 

Here's your robot. 
Let me know if you see anything wrong. 

Jeremy

Hello Jeremy
I have been working in this robot VT6 where i have to set two TCP. Can you tell me how to do it.

Regards

Azhagar S

[Jeremy]

Hi Azhagar,

Take a look at this playlist.
You will find the info you want in the two videos related to the Tool.
https://www.youtube.com/playlist?list=PL..._SCH7wxxXl

You should take a look at the whole playlist though.

Lasting, keep the technical questions in the "General" section, please.

Jeremy

[Azhagar]

Hi Azhagar,

Take a look at this playlist.
You will find the info you want in the two videos related to the Tool.
https://www.youtube.com/playlist?list=PL..._SCH7wxxXl

You should take a look at the whole playlist though.

Lasting, keep the technical questions in the "General" section, please.

Jeremy

Hello Jeremy

Is it possible to add two tcp for single tool. I have a requirement in a simulation where i have define 2 tcp. Please tell me how to do it ?