Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

TWIN DIGITAL

#1
Hello, I am interested in building a digital twin, I work with a UR3 robot, the robodk works to send data to UR3, and I want to have data from UR3, to combine simulation with real data, therefore to have on screen the real movements of the robot. Any idea if this can be done?
#2
Yes, this is possible. There is a script called UR_ActiavteMonitoring that will allow you to update the position of your real robot in RoboDK in real time:
https://robodk.com/doc/en/Robots-Univers...UR-Monitor

Also, these are some tips to accurately represent your real UR robot in RoboDK:

  1. Make sure to import the robot kinematics in RoboDK by following this procedure:
    https://robodk.com/doc/en/Robots-Univers...Kinematics
  2. Make sure to properly define/calibrate your tool:
    https://robodk.com/doc/en/General.html#CalibrateTCP
  3. Make sure to properly calibrate the coordinate system of your part:
    https://robodk.com/doc/en/General.html#CalibrateFrame
#3
ok thanks, I have tried it and it works for me, however I would like to be able to bring to the RoboDK, the variables that I have defined in the UR, for example the value of the timers, is it possible to do it?
#4
I don't think you can remotely extract variables from your UR programs.
  




Users browsing this thread:
1 Guest(s)